RADCOAT LOLM ANTI-STATIC VARNISH VR2136
Product Code
VR2136
Quality Management
Our Laboratory is equipped with the latest testing equipment for quality and developmental purposes, enabling us to produce tailor-made products to our customers’ specifications and enabling us to maintain product integrity.
ISO 9001 : 2015
To complement its existing high quality service and customer satisfaction record and to add weight to its policy to be a world-class manufacturer, the company implemented ISO 9001 : 2015 with the assistance of IMSM. Classiq Coatings is proud to be able to display the ISO logo on all its products as a further indication of the staff’s commitment to continuous quality and consistency.
Decription
Features
- High gloss
- Low migration
- Very low taint and odour
- Low co-efficient of friction
- High scuff and abrasion resistance
- Good adhesion to a variety of substrates
- Excellent flow and leveling
- Fast curing speeds
- Low foaming
- Water white
Properties
Cure speed (80W) | 92 m/min |
Relative Density | 1.08 @ 25°C |
Viscosity | 12 – 13 Sec Zahn Cup No.4 @ 25°C |
Solids content | 100% |
Flash Point | N/A |
Gloss | >90 % (Valkraft Board) @ 60° |
Recommended Film Weight | 3 – 6 g/m² |
Angle of Slide | 30 – 35° coating-to-coating |
Drying
Packaging and Storage
General
VR2136 does not contain ITX (Isopropylthioxanthone) or TAA (Titanium Acetylacetonate).
The raw materials used in VR2136 are acceptable for use under EU regulations governing hazardous materials for the packaging industry. VR2136 is not toxic but will cause taint and odour problems if in direct contact with foodstuffs, especially those of a high fat content. Therefore, VR2136 should be used only in applications where the varnish does not come into direct contact with food.
THIS DATA SUPERCEDES ANY PREVIOUS DATA PRIOR TO DECEMBER, 2020
Quick Contact
RESEARCH & DEVELOPMENT
Innovation is at the heart of our company.
With our team of highly qualified technical personnel and over 150 years experience, we are perfectly equipped and passionate about handling the challenges in the Printing and Packaging industry.
